Hot Tub Parts and Accessories / Hot Tub Cover Lifters

<< Back

Oasis by Covana
$12,995.00
Brand: Covana

You can save this product on your favorites list when logged in to your account. Login now

Description

OASIS - Standard Model Automatic Hot Tub Cover

You are not dreaming! The Covana OASIS is not only a hot tub cover, it’s also an automated, state-of-the-art, easy-to-use gazebo!

Closed: Its water-tight seal reduces the spa’s heating costs due to its superior insulation value while, at the same time, preventing undesirable access, thus protecting your investment for as long as you own it! (In contrast, more traditional covers rarely last more than 3 years!)

Open: Within 20 seconds, you have a modern, elegant gazebo that protects you against storms and harmful ultraviolet radiations, providing you with an intimate, private space where you can dream, think and reflect, thanks to retractable shades available as an option.

Lighting: The LED lighting system was designed to create a warm, friendly atmosphere and relaxing ambiance based on a combination of 7 carefully-chosen colours.

Upgrade: Includes 1 Roller Shade

Color: Slate

Roof Style: Darling

Hot Tub Compatibility:

Most square, rectangular, or round hot tubs with a flat surface (no protruding headrests, waterfalls, speakers, etc.) of up to 92" x 98" (234 cm x 249 cm) with a height between 34" and 48" (86 cm x 122 cm). The seal of the cover will have to be installed on a flat surface on the acrylic of the hot tub. The minimum turn radius of the seal is 4" (10 cm). Ensure the seal will be able to go all around the hot tub while continuously touching the inner shell

Electrical Requirements:

All electrical work should be done by a certified electrician, otherwise the certification and warranty will be void.

• The cover requires a dedicated single-phase 115 VAC (North America) or 230 VAC (Europe) hard-wired power supply.

• The cover must be installed in accordance with and comply with all applicable local codes and regulations.

• Wires and conduits should be sized according to local codes and regulations.

Electrical specifications North American requirements:

Voltage 115 V, 60 Hz (1 hot, 1 neutral, 1 ground)
GFCI 15 A single-pole GFCI (not included)
Current draw Max 12 A

The Base / Foundation:

• A clean, flat and level surface such as an engineered wood deck or a concrete slab is needed.

• The foundation must be able to support at least 600 lb (272 kg).

• Any water accumulating around the cover will have to be drained.

• Allow for at least 24" (60 cm) of clearance for maintenance on the motor and entrance sides, and 6" (15 cm) on the other sides.

• The four jacks will have to be properly anchored to the foundation (anchors not included).

Tips For Choosing The Perfect Location:

The Covana cover can be installed either indoors or outdoors.

• Away from flood zone, water downpours or debris falling.

• Wind speed should not exceed 30 mph (50 km/h) in the raised position.

• Operating area must be free from obstacles, i.e., branches or electrical power lines.

• Allow for safe access to the spa, free of obstacles or debris.

• Sunlight must not converge or be directly reflected on the cover such as the reflection from a window.

• The installation area must be clean and free of any vegetation (i.e., grass, branches, roots) and mineral contaminants (i.e., rocks, dust, sand).

• The key switch must be permanently mounted and located 5 ft (1.5 m) away from the spa and 5 ft (1.5 m) above the deck or ground level in a location where no water downpour or debris could fall on it.

• The user must have a clear view of the cover when operating it (25 ft / 7.6 m cable).

Alberta's Online Pool and Spa, Hot Tub and Swim Spa Equipment and Supply Superstore!

DOWNLOADS

Specifications Manual https://youtube.com/shorts/DHh0Wa0dzR8?si=bswX-rcxJ3EZq66b